Chlor Stop is a Bleach Neutralizer and Plant Protector
It is utilized as a secondary rinse following the soft wash process to neutralize corrosive bleach crystals on cleaned surfaces, plants and equipment. It will remove bleach streak, which results from poor rinsing of bleach solution following cleaning. Spraying Chlor Stop on and thorugh equipment, trailers and vehicles will neutralize bleach crystals to protect from rapid corrosion, both by neutralizing the bleach solution as with active corrosion inhibitors in formulation. Pumps, sprayers, hoses and fittings should be flushed, this stopping premature repairs and replacement. Use to spray sensitive shrubbery and outdoor (non-edible_ plants before and after use of bleach, in order to prevent harm. Always rinse plants thoroughly with water following use. Do not leave product to dry on plants.
Directions:
Pre-rinse all surfaces to be treated. Mix 2-4 oz. of Chlor Stop per gallon of water for low pressure spray applications on windows or to spray down equipment. MIx 2-4 oz per gallon for X-Jet application. Mix 4-6 oz per gallon for downstream injectors. Rinse lightly.
Not Regulated by DOT
