General Pump

TSF2221 by General Pump 66 Series High Flow 22 MM Solid Shaft GPM: 10.2 PSI: 3000 RPM: 1750 This is a bare pump without unloader. You must add a proper unloader or pressure regulator. If replacing a...

This is an industrial built all stainless A- framed Manual Hose Reel made by General Pump Model DHRA50300SS Capacity: 300 Feet of 3/8" Hose Maximum Temperature: 250 Degrees Max PSI: 5000 3/8"...

This is an industrial built A- framed Manual Hose Reel made by General Pump Model DHRA50300 Capacity: 300 Feet of 3/8" Hose Maximum Temperature: 250 Degrees Max PSI: 5000 3/8" FPT fittings are...

General High Draw Injector with 1/2" Stainless Quick Connects 1/2" MPT 2.5 Injector for 5-8 GPM (It is also commonly used on some higher GPM machines) *Remember that chemical injectors are...

General High Draw Injector 1/2" MPT 2.5 Injector for 5-8 GPM (It is also commonly used on some higher GPM machines)

General Pump High Draw Chemical Injector Part Number: 100776 2.1 MM Orfice 5-8 GPM 450 PSI 190° Max Up to 20% Draw Rate 3/8" Male Pipe Thread Inlet/Outlet 1/4" Hose Barb Chemical...

General Pump Kit 23 Oil Seals ( Set of 3 ) If you have any questions please contact us before purchasing. Call / Text 877-786-7444 email sales@thePumpOutlet.com  

General Pump Original Parts Packing Kit KIT153 If you have any questions, please contact us before purchase. We are happy to assist our customers! jconner@airlessoutlet.com 770-532-4442  

General Pump Original Parts KIT123 Valve Kit for: TC1504E345UI, TC1505E345, TC1506G, TC1507G, TC1508G, TC1509G TC1507S34, TC1508S34, TC1509S17, TC1511S17 TC1809E175 TC1809S17,...

General Pump Original Parts KIT109 Packing Kit for  T9281, T5050 Pump If you have any questions, please contact us before purchase. We are happy to assist our...

 General Pump 20" surface cleaner comes with a 2 tip spray bar with 25025 tips. Works well with machines rated between 5 GPM - 8 GPM 4000 PSI Maximum Not recommended for use with hot...

Made by General Pump Protects your pump from damaging heat build up while it is in the bypass mode. 100 PSI 145° F